1.54 inch E-Ink display module (Three Color)

200×200, 1.54inch E-Ink display module, three-color, SPI interface
Overview
This is an E-Ink display module, 1.54inch, 200×200 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Features
• No backlight, keeps displaying last content for a long time even when power down
• Ultra low power consumption, basically power is only required for refreshing
• SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
• Onboard voltage translator, compatible with 3.3V/5V MCUs
• Comes with development resources and manual (examples for Raspberry Pi/STM32)
Specifications
• Operating voltage: 3.3V/5V
• Interface: 3-wire SPI, 4-wire SPI
• Outline dimension: 48mm × 33mm
• Display size: 27.6mm × 27.6mm
• Dot pitch: 0.138 × 0.138
• Resolution: 200 × 200
• Display color: red, black, white
• Grey level: 2
• Full refresh time: 8s
• Refresh power: 26.4mW(typ.)
• Standby power: <0.017mW • Viewing angle: >170°
Interface
SYMBOL DESCRIPTION
VCC 3.3V/5V
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, low active
DimensionsDevelopment Resources:
Click here to know more about this product.
Click here to know how to use it and download necessary files.
We also have a Monochrome alternative of this product. Get that one here.