CP2102 EVAL BOARD

The CP2102 EVAL BOARD is an evaluation board designed for CP2102, integrates MAX3232/SP3232, USB connector, DB9 connector onboard.
CP2102 features:
• Single-Chip USB to UART Data Transfer
o No external resistors required, no external crystal required
o On-chip power-on reset circuit and voltage regulator
o Integrated 1024-Byte EEPROM
• USB Function Controller
o USB Specification 2.0 compliant; full-speed (12 Mbps)
o USB suspend states supported via SUSPEND pins
• UART
o All handshaking and modem interface signals
o Data formats supported:
 Data bits: 5, 6, 7, and 8
 Stop bits: 1, 1.5, and 2
 Parity: odd, even, no parity
o Baud rates: 300 bps to 1 Mbits
o 576 Byte receive buffer; 640 byte transmit buffer
o Hardware or X-On/X-Off handshaking supported
o Event character support
• Virtual COM Port Device Drivers
o Windows 8/7/Vista/Server 2003/XP/2000
o MAC OS-X/OS-9
o Linux 2.40 or higher
• USBXpress Direct Driver Support
o Windows 7/Vista/Server 2003/XP/2000
o Windows CE
• Temperature Range
o –40 to +85 °C
Features
• Supports Windows 8
• A complete solution for USB TO COM
• Also used as USB TO TTL (disconnect the RXDJMP, TXDJMP, and no RS232 device to be connected)
How to Use?
In the case of working with a MCU:
• VCC: 5V output
• GND: connects to GND
• TXD: connects to MCU.RX (signal direction: MCU.RX << CP2102 << PC.TX) • RXD: connects to MCU.TX (signal direction: MCU.TX >> CP2102 >> PC.RX)
• RTS: connects to MCU.CTS (signal direction: MCU.CTS << CP2102 << PC.RTS) • CTS: connects to MCU.RTS (signal direction: MCU.RTS >> CP2102 >> PC.CTS)
• Click here to know more about this product.