- You can get the product from our office
- Home delivery is also available
- Delivery charge: Inside Dhaka-60 Taka, outside Dhaka-99 Taka
- We will send a custom made invoice with discount amount at the time of delivery.
- No existing offer will be applicable if customer avails this offer.
- Once the product is purchased,it will not be refundable
- Your booking does not always guarantee product delivery. Product delivery is entirely subjected to availability of stock
- Color of the products may slightly vary due to photography, lighting sources or your monitor setting/ PC resolution
- Product delivery may be interrupted or delayed due to natural disaster or in case of political unrest
- In case of delivery outside Dhaka, customers may have to collect certain products from the nearby courier service office.
“LCD Display 16X2 with Header” has been added to your cart. View cart






1.54 inch E-Ink display module (Three Color)
৳ 1,550.00 Original price was: ৳ 1,550.00.৳ 1,540.00Current price is: ৳ 1,540.00.

1.54 inch E-Ink display module (Monochrome)
৳ 1,450.00 Original price was: ৳ 1,450.00.৳ 1,440.00Current price is: ৳ 1,440.00.
2.13inch E-Ink display HAT for Raspberry Pi
৳ 1,660.00 Original price was: ৳ 1,660.00.৳ 1,630.00Current price is: ৳ 1,630.00.
Model : DIS-00085
Supplier : Techbazar.com.bd
Techbazar.com.bd, Bangladesh
Category: Displays
Tags: 2.13inch E-Ink display HAT for Raspberry Pi, DIS-00085
Description
250×122, 2.13inch E-Ink display HAT for Raspberry Pi, SPI interface
Overview
This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250×122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Features
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
- Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications
- Operating voltage: 3.3V/5V
- Interface: SPI
- Outline dimension: 65mm × 30.2mm
- Display size: 23.71mm × 48.55mm
- Dot pitch: 0.194 × 0.194
- Resolution: 250 × 122
- Display color: black, white
- Grey level: 2
- Partial refresh time: 0.3s
- Full refresh time: 2s
- Refresh power: 26.4mW(typ.)
- Standby power: <0.017mW
- Viewing angle: >170°
Interface
SYMBOL | DESCRIPTION |
VCC | 3.3V/5V |
GND | Ground |
NC | NC |
DIN | SPI MOSI pin |
CLK | SPI SCK pin |
CS | SPI chip selection, low active |
DC | Data/Command selection (high for data, low for command) |
RST | External reset, low active |
BUSY | Busy status output, high active |
Demo
Dimensions
We also have a Monochrome alternative of this product. Get that one here.
Reviews (0)
Be the first to review “2.13inch E-Ink display HAT for Raspberry Pi” Cancel reply
Shipping & Delivery

Reviews
There are no reviews yet.