- You can get the product from our office
- Home delivery is also available
- Delivery charge: Inside Dhaka-60 Taka, outside Dhaka-99 Taka
- We will send a custom made invoice with discount amount at the time of delivery.
- No existing offer will be applicable if customer avails this offer.
- Once the product is purchased,it will not be refundable
- Your booking does not always guarantee product delivery. Product delivery is entirely subjected to availability of stock
- Color of the products may slightly vary due to photography, lighting sources or your monitor setting/ PC resolution
- Product delivery may be interrupted or delayed due to natural disaster or in case of political unrest
- In case of delivery outside Dhaka, customers may have to collect certain products from the nearby courier service office.

3.2 Inch 320x240 Touch LCD (C) Shield
৳ 1,160.00 Original price was: ৳ 1,160.00.৳ 1,150.00Current price is: ৳ 1,150.00.

Arduino MicroSD Shield
৳ 1,165.00 Original price was: ৳ 1,165.00.৳ 1,154.00Current price is: ৳ 1,154.00.
Arduino Weather Station Shield
৳ 500.00 Original price was: ৳ 500.00.৳ 490.00Current price is: ৳ 490.00.
Model : ARD-00112
Supplier :Techbazar.com.bd, Bangladesh
Categories: Arduino, Shields
Tag: Arduino Weather Station Shield
Description
Introduction
Arduino Weather Station Shield is a temperature and humidity measuring module with 4 seven-segment digits. This device plugs into an Arduino Uno board and comes with a pluggable DHT11 sensor. Just upload the Demo Code from the documents section into your Arduino Uno and enjoy the full functionality of a weather station. You can power the Arduino from a power bank (5V) / mobile charger (5V) / external DC jack (7V to 12V) and showcase your low-cost weather station.
Features
- Measures temperature and humidity using an Arduino Uno, without any wire connection.
- 4 seven segment digits with decimal points allow clearer annotation and precise values.
- 4 transistors on digit pins and 8 current limiting resistors on segment pins ensure the safety of Arduino Uno’s digital I/O pins.
- Multiplexing technique saves pins and allows the user to use 7 digital I/O pins: D0(Rx), D1(Tx), D9(PWM), D10(PWM), D11, D12, D13
- Stackable color-coded header for other purposes.
- Comes with a pluggable DHT11 sensor but can be replaced with a more powerful DHT22.
DHT11 (comes with the package) | DHT22 (not included but compatible with this module) |
Resolution: 1.0 %RH & 1°C | Resolution: 0.1 %RH & 0.1°C |
Good for 20-90% humidity readings with 5% accuracy | Good for 0-100% humidity readings with 2-5% accuracy |
Good for 0-50°C temperature readings ±2°C accuracy | Good for 0-50°C temperature readings ±2°C accuracy |
No more than 1 Hz sampling rate (once every second) | No more than 0.5 Hz sampling rate (once every 2 seconds) |
Click on the “Documents” tab to get the demo code for both DHT11 and DHT22.
Reviews (0)
Be the first to review “Arduino Weather Station Shield” Cancel reply
Shipping & Delivery

Reviews
There are no reviews yet.